|
Welcome To Archery Outfitters Online Arrow Page |
|
Easton Carbon Impact Gold Tip |
Arrows Arrows Arrows Arrows Arrows Arrows Arrows
|
Nocks will be shipped loose with glued on style arrows so they can be set to your positioning that you desire (Custom Arrows) Your Arrow length is measured from a assembled arrow at the cut end of the shaft to the bottom of the nock grove where the string sits. Do not measure it any other way, as it will be wrong when you get it. Make sure your E-Mail is with your order.
|
Other uni nock systems are sold with the nock already installed on the shaft from the factory. The color of the nock is set by the factory. you can make special arrangements for custom arrows |
Carbon Impact arrows come from the factory with the nocks already on or in the arrow. They can be ordered with a Push on pin type nock, Or an internal type like the bohning uni nock.
We build all sorts of custom arrows to order, wraps or fletching to your order. |
![]()
|
The New Max Hunter Broadhead Vanes are here in stock!!!
Order your arrows with them!!
|
Six different Colors |
Fluorescent Orange - Purple - white - Black Fluorescent Green - Fluorescent Yellow |
These Vanes Out Stick And Out Perform All Of The Other little Vanes On Any Arrow Surface. |
|
|
Shield Cut 2.1 Inches Long |
They Work And Stick Better Than Blazers On Any Arrow Surface |
The Look And Work Great |
|
|
|
|
They are on the arrow component page link below click here>>>> Max Hunter | |
| I Personally have shot huge Broadheads with these vanes and was either on the money or within 1 inch of dead center. Mechanical heads dead on bullseyes every time. | They are made of a very pliable strong material that is great in whisker biscuits and does not wrinkle from shooting. |
Check These Out |
|
Super Uni |
3D Super |
"G" nock |
"Z" nock |
Plastinock |
Cross Bow | Roto nock | ||
$6.49Per Doz. |
$6.49 Per Doz. |
Per Doz. |
Per Doz. |
$6.49 Per Doz. |
![]() $6.49 Per Doz. |
![]() $6.49 Per Doz. |
||
|
WE can not express enough, the safety precautions you should take when shooting carbon arrows! Read all safety precautions sold with your arrows! |
|
Easton Carbon Arrows |
|
|
|
When You Use Carbon Arrows, Use Them Safely |
Carbon Arrows |
New Carbon Impact XLT Arrows | THE ORIGINATOR OF
THE WRAPPED CARBON SHAFT FOR HUNTING. |
Closer tolerances in weight and straightness |
![]() |
![]()
THE
INVENTOR When Pierre Pujos started his first business venture in 1985, he could not have imagined the impact his new invention, the all-carbon arrow, was about to have on the archery industry. |
![]() |
Push in type nock
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
3" 4" 5" Vanes Factory 3 Fletch |
|||
|
Green Level 6000 - 6500 - 7500 +/- .001 |
A O's Price: $115.00 | Shafts A O's Price: $100.00 | |
|
Orange Level 6000 - 6500 - 7500 +/- .002 |
A O's Price: $85.00 | Shafts A O's Price: $75.00 | |
|
Yellow Level 6000 - 6500 - 7500 +/- .003 |
A O's Price:$75.00 | Shafts A O's Price: $65.00 | |
|
Blue Level 6000 - 6500 - 7500 +/- .004 |
A O's Price:$65.00 | Shafts A O's Price: $55.00 | |
| Carbon Impact |
Arrows |
Bare shafts W/ inserts & nocks |
|
|
![]() |
|
Gold Tip Arrows & Shafts |
||
|
Gold tip Expedition Hunter Arrows Hunter 3555 - 5575 - 7595 A O's Price: $72.99 |
Shafts A O's Price: $63.99 | |
| Like the XT, the Gold Tip Hunter shaft is also crafted with 5 precision layers of graphite fiber. The Hunter is considered to be a very consistent, highly durable hunting shaft. It is available in three sizes. | ||
|
||
| Flex It First
Always inspect each arrow for damage before each shot. Proper care of graphite arrows can ensure years of quality performance. However, shafts can be damaged. To inspect the arrow, hold it on both ends and flex it away from yourself and others while visibly and audibly checking for splinters, cracks or nicks. Rotate and repeat this inspection four to five times. If you find the arrow to be damaged in any way, destroy it immediately. Shooting damaged graphite arrows can result in arrow failure and possible bodily injury. Always cut arrows to the correct length It is very important to cut the graphite arrows to the correct length. Arrows that are cut too short can become lodged in the arrow rest or behind the riser of the bow. Shooting an arrow that is lodged in a bow in this manner will almost certainly result in arrow failure, damage to equipment and personal injury. Gold Tip strongly recommends that arrows be cut no less than one to one and one-half inches in front of the arrow rest. Review your overdraw practices The use of an overdraw that allows shooters to draw the forward tip of an arrow past the bows handgrip, significantly increases the risk of injury to the shooter. Even when using a bow equipped with an overdraw, the arrow should always be cut one to one and one-half inches in front of the farthest point from where the arrow contacts the rest at full draw length. Select an arrow length that does not allow the arrow to be drawn past the arrow rest. Selecting the correct arrow length is solely the responsibility of the shooter. Adjust your arrow rest Before shooting Gold Tip arrows, it is extremely important to inspect the rest and insure it is properly adjusted for the diameter of the arrow being shot because shaft diameters vary from arrow to arrow (For example, XT Hunter to Series 22). Failure to properly adjust the arrow rest significantly increases the risk of injury to the shooter. Incorrect rest adjustment may cause the arrow to fall off of the rest and/or get hung up in the bow, potentially resulting in injuries to the shooter or bystanders. Always make sure that your equipment and especially your rest is properly adjusted to the proper shaft diameter by a qualified individual before shooting Gold Tip arrows. |

